Port DB calls to PHP PDO
--- a/aws/pg_hba.conf
+++ b/aws/pg_hba.conf
@@ -72,4 +72,6 @@
host all all 127.0.0.1/32 trust
# IPv6 local connections:
host all all ::1/128 trust
+#Allow any IP to connect, with a password:
+host all all 0.0.0.0 0.0.0.0 md5
--- /dev/null
+++ b/aws/postgresql.conf
@@ -1,1 +1,502 @@
-
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# (The "=" is optional.) Whitespace may be used. Comments are introduced with
+# "#" anywhere on a line. The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload". Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on". Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units: kB = kilobytes Time units: ms = milliseconds
+# MB = megabytes s = seconds
+# GB = gigabytes min = minutes
+# h = hours
+# d = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir' # use data in another directory
+ # (change requires restart)
+#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
+ # (change requires restart)
+#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
+ # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+#external_pid_file = '(none)' # write an extra PID file
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+listen_addresses = '*' # what IP address(es) to listen on;
+ # comma-separated list of addresses;
+ # defaults to 'localhost', '*' = all
+ # (change requires restart)
+#port = 5432 # (change requires restart)
+max_connections = 100 # (change requires restart)
+# Note: Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3 # (change requires restart)
+#unix_socket_directory = '' # (change requires restart)
+#unix_socket_group = '' # (change requires restart)
+#unix_socket_permissions = 0777 # begin with 0 to use octal notation
+ # (change requires restart)
+#bonjour_name = '' # defaults to the computer name
+ # (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min # 1s-600s
+#ssl = off # (change requires restart)
+#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # allowed SSL ciphers
+ # (change requires restart)
+#ssl_renegotiation_limit = 512MB # amount of data between renegotiations
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos and GSSAPI
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres' # (Kerberos only)
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 32MB # min 128kB
+ # (change requires restart)
+#temp_buffers = 8MB # min 800kB
+#max_prepared_transactions = 0 # zero disables the feature
+ # (change requires restart)
+# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+#work_mem = 1MB # min 64kB
+#maintenance_work_mem = 16MB # min 1MB
+#max_stack_depth = 2MB # min 100kB
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000 # min 25
+ # (change requires restart)
+#shared_preload_libraries = '' # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0ms # 0-100 milliseconds
+#vacuum_cost_page_hit = 1 # 0-10000 credits
+#vacuum_cost_page_miss = 10 # 0-10000 credits
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
+#vacuum_cost_limit = 200 # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1 # 1-1000. 0 disables prefetching
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#fsync = on # turns forced synchronization on or off
+#synchronous_commit = on # immediate fsync at commit
+#wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync
+ # fsync
+ # fsync_writethrough
+ # open_sync
+#full_page_writes = on # recover from partial page writes
+#wal_buffers = 64kB # min 32kB
+ # (change requires restart)
+#wal_writer_delay = 200ms # 1-10000 milliseconds
+
+#commit_delay = 0 # range 0-100000, in microseconds
+#commit_siblings = 5 # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min # range 30s-1h
+#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s # 0 disables
+
+# - Archiving -
+
+#archive_mode = off # allows archiving to be done
+ # (change requires restart)
+#archive_command = '' # command to use to archive a logfile segment
+#archive_timeout = 0 # force a logfile segment switch after this
+ # number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0 # measured on an arbitrary scale
+#random_page_cost = 4.0 # same scale as above
+#cpu_tuple_cost = 0.01 # same scale as above
+#cpu_index_tuple_cost = 0.005 # same scale as above
+#cpu_operator_cost = 0.0025 # same scale as above
+#effective_cache_size = 128MB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5 # range 1-10
+#geqo_pool_size = 0 # selects default based on effort
+#geqo_generations = 0 # selects default based on effort
+#geqo_selection_bias = 2.0 # range 1.5-2.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100 # range 1-10000
+#constraint_exclusion = partition # on, off, or partition
+#cursor_tuple_fraction = 0.1 # range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr' # Valid values are combinations of
+ # stderr, csvlog, syslog and eventlog,
+ # depending on platform. csvlog
+ # requires logging_collector to be on.
+
+# This is used when logging to stderr:
+logging_collector = on # Enable capturing of stderr and csvlog
+ # into log files. Required to be on for
+ # csvlogs.
+ # (change requires restart)
+
+# These are only used if logging_collector is on:
+log_directory = 'pg_log' # directory where log files are written,
+ # can be absolute or relative to PGDATA
+log_filename = 'postgresql-%a.log' # log file name pattern,
+ # can include strftime() escapes
+log_truncate_on_rotation = on # If on, an existing log file of the
+ # same name as the new log file will be
+ # truncated rather than appended to.
+ # But such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+log_rotation_age = 1d # Automatic rotation of logfiles will
+ # happen after that time. 0 disables.
+log_rotation_size = 0 # Automatic rotation of logfiles will
+ # happen after that much log output.
+ # 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+#silent_mode = off # Run server silently.
+ # DO NOT USE without syslog or
+ # logging_collector
+ # (change requires restart)
+
+
+# - When to Log -
+
+#client_min_messages = notice # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+
+#log_min_messages = warning # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+#log_error_verbosity = default # terse, default, or verbose messages
+
+#log_min_error_statement = error # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic (effectively off)
+
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, > 0 logs only
+ # statements running at least this number
+ # of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_hostname = off
+#log_line_prefix = '' # special values:
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %p = process ID
+ # %t = timestamp without milliseconds
+ # %m = timestamp with milliseconds
+ # %i = command tag
+ # %c = session ID
+ # %l = session line number
+ # %s = session start timestamp
+ # %v = virtual transaction ID
+ # %x = transaction ID (0 if none)
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+#log_lock_waits = off # log lock waits >= deadlock_timeout
+#log_statement = 'none' # none, ddl, mod, all
+#log_temp_files = -1 # log temporary files equal or larger
+ # than the specified size in kilobytes;
+ # -1 disables, 0 logs all temp files
+#log_timezone = unknown # actually, defaults to TZ environment
+ # setting
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_functions = none # none, pl, all
+#track_activity_query_size = 1024
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on # Enable autovacuum subprocess? 'on'
+ # requires track_counts to also be on.
+#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
+#autovacuum_naptime = 1min # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
+ # vacuum
+#autovacuum_analyze_threshold = 50 # min number of row updates before
+ # analyze
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
+ # (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
+ # autovacuum, in milliseconds;
+ # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovacuum, -1 means use
+ # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public' # schema names
+#default_tablespace = '' # a tablespace name, '' uses the default
+#temp_tablespaces = '' # a list of tablespace names, '' uses
+ # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#session_replication_role = 'origin'
+#statement_timeout = 0 # in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+#timezone = unknown # actually, defaults to TZ environment
+ # setting
+#timezone_abbreviations = 'Default' # Select the set of available time zone
+ # abbreviations. Currently, there are
+ # Default
+ # Australia
+ # India
+ # You can create your own file in
+ # share/timezonesets/.
+#extra_float_digits = 0 # min -15, max 2
+#client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8' # locale for system error message
+ # strings
+lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
+lc_numeric = 'en_US.UTF-8' # locale for number formatting
+lc_time = 'en_US.UTF-8' # locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#add_missing_from = off
+#array_nulls = on
+#backslash_quote = safe_encoding # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#regex_flavor = advanced # advanced, extended, or basic
+#sql_inheritance = on
+#standard_conforming_strings = off
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+#custom_variable_classes = '' # list of custom variable class names
+
--- /dev/null
+++ b/dotcloud/postinstall
@@ -1,1 +1,19 @@
+#!/bin/bash
+#dotcloud postinstall
+curl http://s3-ap-southeast-1.amazonaws.com/busresources/cbrfeed.zip \
+-o /home/dotcloud/current/cbrfeed.zip
+wget http://s3-ap-southeast-1.amazonaws.com/busresources/Graph.obj \
+-O /tmp/Graph.obj
+
+#db setup
+#curl https://github.com/maxious/ACTBus-ui/raw/master/transitdata.cbrfeed.sql.gz -o transitdata.cbrfeed.sql.gz
+#curl https://github.com/maxious/ACTBus-ui/raw/master/lib/postgis.sql -o postgis.sql
+#createlang -d transitdata plpgsql
+#psql -d transitdata -f postgis.sql
+#gunzip /var/www/transitdata.cbrfeed.sql.gz
+#psql -d transitdata -f transitdata.cbrfeed.sql
+#createuser transitdata -SDRP
+#password transitdata
+#psql -c \"GRANT SELECT ON TABLE agency,calendar,calendar_dates,routes,stop_times,stops,trips TO transitdata;\"
+
--- /dev/null
+++ b/dotcloud/push.sh
@@ -1,1 +1,7 @@
+#wget http://s3-ap-southeast-1.amazonaws.com/busresources/opentripplanner-webapp.war
+cp ~/workspace/opentripplanner/maven.1277125291275/opentripplanner-webapp/target/opentripplanner-webapp.war ./
+#wget http://s3-ap-southeast-1.amazonaws.com/busresources/opentripplanner-api-webapp.war
+cp ~/workspace/opentripplanner/maven.1277125291275/opentripplanner-api-webapp/target/opentripplanner-api-webapp.war ./
+dotcloud push actbus.otp ./
+
--- a/include/common-db.inc.php
+++ b/include/common-db.inc.php
@@ -1,21 +1,23 @@
<?php
- if (php_uname('n') == "actbus-www") {
- $conn = pg_connect("dbname=transitdata user=transitdata password=transitdata host=db.actbus.dotcloud.com port=2242");
- } else if (isDebugServer()) {
- $conn = pg_connect("dbname=transitdata user=postgres password=snmc");
- } else {
- $conn = pg_connect("dbname=transitdata user=transitdata password=transitdata ");
- }
- if (!$conn) {
- die("A database error occurred.\n");
- }
-
- function databaseError($errMsg) {
- die($errMsg);
- }
-
- include('db/route-dao.inc.php');
- include('db/trip-dao.inc.php');
- include('db/stop-dao.inc.php');
- ?>
+if (php_uname('n') == "actbus-www") {
+ $conn = new PDO("pgsql:dbname=transitdata;user=transitdata;password=transitdata;host=bus-main.lambdacomplex.org");
+}
+else if (isDebugServer()) {
+ $conn = new PDO("pgsql:dbname=transitdata;user=postgres;password=snmc;host=localhost");
+}
+else {
+ $conn = new PDO("pgsql:dbname=transitdata;user=transitdata;password=transitdata;host=localhost");
+}
+if (!$conn) {
+ die("A database error occurred.\n");
+}
+function databaseError($errMsg)
+{
+ die($errMsg);
+}
+include ('db/route-dao.inc.php');
+include ('db/trip-dao.inc.php');
+include ('db/stop-dao.inc.php');
+include ('db/servicealert-dao.inc.php');
+?>
--- /dev/null
+++ b/include/common-request.inc.php
@@ -1,1 +1,45 @@
-
+<?php
+if (isset($_REQUEST['firstLetter'])) {
+ $firstLetter = filter_var($_REQUEST['firstLetter'], FILTER_SANITIZE_STRING);
+}
+if (isset($_REQUEST['bysuburbs'])) {
+ $bysuburbs = true;
+}
+if (isset($_REQUEST['bynumber'])) {
+ $bynumber = true;
+}
+if (isset($_REQUEST['allstops'])) {
+ $allstops = true;
+}
+if (isset($_REQUEST['nearby'])) {
+ $nearby = true;
+}
+if (isset($_REQUEST['suburb'])) {
+ $suburb = filter_var($_REQUEST['suburb'], FILTER_SANITIZE_STRING);
+}
+$pageKey = filter_var($_REQUEST['pageKey'], FILTER_SANITIZE_NUMBER_INT);
+$lat = filter_var($_REQUEST['lat'], FILTER_SANITIZE_NUMBER_FLOAT, FILTER_FLAG_ALLOW_FRACTION);
+$lon = filter_var($_REQUEST['lon'], FILTER_SANITIZE_NUMBER_FLOAT, FILTER_FLAG_ALLOW_FRACTION);
+$max_distance = filter_var($_REQUEST['radius'], FILTER_SANITIZE_NUMBER_INT);
+if (isset($_REQUEST['numberSeries'])) {
+ $numberSeries = filter_var($_REQUEST['numberSeries'], FILTER_SANITIZE_NUMBER_INT);
+}
+if (isset($_REQUEST['routeDestination'])) {
+ $routeDestination = urldecode(filter_var($_REQUEST['routeDestination'], FILTER_SANITIZE_ENCODED));
+}
+if (isset($_REQUEST['stopcode'])) {
+ $stopcode = filter_var($_REQUEST['stopcode'], FILTER_SANITIZE_STRING);
+}
+if (isset($_REQUEST['stopids'])) {
+ $stopids = explode(",", filter_var($_REQUEST['stopids'], FILTER_SANITIZE_STRING));
+}
+if (isset($_REQUEST['tripid'])) {
+ $tripid = filter_var($_REQUEST['tripid'], FILTER_SANITIZE_NUMBER_INT);
+}
+if (isset($_REQUEST['stopid'])) {
+ $stopid = filter_var($_REQUEST['stopid'], FILTER_SANITIZE_NUMBER_INT);
+}
+if (isset($_REQUEST['routeid'])) {
+ $routeid = filter_var($_REQUEST['routeid'], FILTER_SANITIZE_NUMBER_INT);
+}
+?>
--- a/include/common-template.inc.php
+++ b/include/common-template.inc.php
@@ -182,7 +182,7 @@
if ($opendiv) {
echo '<div data-role="page">
<div data-role="header" data-position="inline">
- <a href="' . $_SERVER["HTTP_REFERER"] . '" data-icon="arrow-l" data-rel="back" class="ui-btn-left">Back</a>
+ <a href="' . (isset($_SERVER["HTTP_REFERER"]) ? $_SERVER["HTTP_REFERER"] : "javascript:history.go(-1)") . '" data-icon="arrow-l" data-rel="back" class="ui-btn-left">Back</a>
<h1>' . $pageTitle . '</h1>
<a href="/index.php" data-icon="home" class="ui-btn-right">Home</a>
</div><!-- /header -->
@@ -199,7 +199,7 @@
}
}
}
- }
+
}
function include_footer()
{
--- a/include/common-transit.inc.php
+++ b/include/common-transit.inc.php
@@ -4,17 +4,7 @@
'saturday',
'weekday'
);
-function getServiceOverride() {
- global $conn;
- $query = "Select * from calendar_dates where date = '".date("Ymd")."' and exception_type = '1'";
- debug($query,"database");
- $result = pg_query($conn, $query);
- if (!$result) {
- databaseError(pg_result_error($result));
- return Array();
- }
- return pg_fetch_assoc($result);
-}
+
function service_period()
{
--- a/include/common.inc.php
+++ b/include/common.inc.php
@@ -6,7 +6,7 @@
"phperror",
"awsotp",
//"squallotp",
- //"vanilleotp",
+ "vanilleotp",
"database",
"other"
);
@@ -15,6 +15,9 @@
$otpAPIurl = 'http://localhost:8080/opentripplanner-api-webapp/';
if (isDebug("awsotp") || php_uname('n') == "maxious.xen.prgmr.com") {
$otpAPIurl = 'http://bus-main.lambdacomplex.org:8080/opentripplanner-api-webapp/';
+}
+if (isDebug("dotcloudotp") || php_uname('n') == "actbus-www") {
+ $otpAPIurl = 'http://otp.actbus.dotcloud.com/opentripplanner-api-webapp/';
}
if (isDebug("squallotp")) {
$otpAPIurl = 'http://10.0.1.108:5080/opentripplanner-api-webapp/';
@@ -30,6 +33,7 @@
include_once ("common-session.inc.php");
include_once ("common-db.inc.php");
include_once ("common-template.inc.php");
+include_once ("common-request.inc.php");
function isDebugServer()
{
--- a/include/db/route-dao.inc.php
+++ b/include/db/route-dao.inc.php
@@ -1,160 +1,211 @@
<?php
+function getRoute($routeID)
+{
+ global $conn;
+ $query = "Select * from routes where route_id = :routeID LIMIT 1";
+ debug($query, "database");
+ $query = $conn->prepare($query);
+ $query->bindParam(":routeID", $routeID);
+ $query->execute();
+ if (!$query) {
+ databaseError($conn->errorInfo());
+ return Array();
+ }
+ return $query->fetch(PDO::FETCH_ASSOC);
+}
+function getRoutes()
+{
+ global $conn;
+ $query = "Select * from routes order by route_short_name;";
+ debug($query, "database");
+ $query = $conn->prepare($query);
+ $query->execute();
+ if (!$query) {
+ databaseError($conn->errorInfo());
+ return Array();
+ }
+ return $query->fetchAll();
+}
+function getRoutesByNumber($routeNumber = "")
+{
+ global $conn;
+ if ($routeNumber != "") {
+ $query = "Select distinct routes.route_id,routes.route_short_name,routes.route_long_name,service_id from routes join trips on trips.route_id =
+routes.route_id join stop_times on stop_times.trip_id = trips.trip_id where route_short_name = :routeNumber order by route_short_name;";
+ }
+ else {
+ $query = "SELECT DISTINCT route_short_name from routes order by route_short_name";
+ }
+ debug($query, "database");
+ $query = $conn->prepare($query);
+ if ($routeNumber != "") {
+ $query->bindParam(":routeNumber", $routeNumber);
+ }
+ $query->execute();
+ if (!$query) {
+ databaseError($conn->errorInfo());
+ return Array();
+ }
+ return $query->fetchAll();
+}
+function getRoutesByNumberSeries($routeNumberSeries = "")
+{
+ global $conn;
+ if (strlen($routeNumberSeries) == 1) {
+ return getRoutesByNumber($routeNumberSeries);
+ }
+ $seriesMin = substr($routeNumberSeries, 0, -1) . "0";
+ $seriesMax = substr($routeNumberSeries, 0, -1) . "9";
+ $query = "Select distinct routes.route_id,routes.route_short_name,routes.route_long_name,service_id from routes join trips on trips.route_id =
+routes.route_id join stop_times on stop_times.trip_id = trips.trip_id where to_number(route_short_name, 'FM999') between :seriesMin and :seriesMax OR route_short_name LIKE :routeNumberSeries order by route_short_name;";
+ debug($query, "database");
+ $query = $conn->prepare($query);
+ $query->bindParam(":seriesMin", $seriesMin);
+ $query->bindParam(":seriesMax", $seriesMax);
+ $routeNumberSeries = "% ".substr($routeNumberSeries, 0, -1)."%";
+ $query->bindParam(":routeNumberSeries", $routeNumberSeries);
+ $query->execute();
+ if (!$query) {
+ databaseError($conn->errorInfo());
+ return Array();
+ }
+ return $query->fetchAll();
+}
+function getRouteNextTrip($routeID)
+{
+ global $conn;
+ $query = "select * from routes join trips on trips.route_id = routes.route_id
+join stop_times on stop_times.trip_id = trips.trip_id where
+arrival_time > :currentTime and routes.route_id = :routeID order by
+arrival_time limit 1";
+ debug($query, "database");
+ $query = $conn->prepare($query);
+ $query->bindParam(":currentTime", current_time());
+ $query->bindParam(":routeID", $routeID);
+ $query->execute();
+ if (!$query) {
+ databaseError($conn->errorInfo());
+ return Array();
+ }
+ $r = $query->fetch(PDO::FETCH_ASSOC);
-function getRoute($routeID) {
- global $conn;
- $query = "Select * from routes where route_id = '$routeID' LIMIT 1";
- debug($query,"database");
- $result = pg_query($conn, $query);
- if (!$result) {
- databaseError(pg_result_error($result));
- return Array();
- }
- return pg_fetch_assoc($result);
-}
-function getRoutes() {
- global $conn;
- $query = "Select * from routes order by route_short_name;";
- debug($query,"database");
- $result = pg_query($conn, $query);
- if (!$result) {
- databaseError(pg_result_error($result));
- return Array();
- }