| <?php |
<?php |
| // SELECT array_to_string(array(SELECT REPLACE(name_2006, ',', '\,') as name FROM suburbs order by name), ',') |
// SELECT array_to_string(array(SELECT REPLACE(name_2006, ',', '\,') as name FROM suburbs order by name), ',') |
| $suburbs = explode(",", "Acton,Ainslie,Amaroo,Aranda,Banks,Barton,Belconnen,Bonner,Bonython,Braddon,Bruce,Calwell,Campbell,Chapman,Charnwood,Chifley,Chisholm,City,Conder,Cook,Curtin,Deakin,Dickson,Downer,Duffy,Dunlop,Evatt,Fadden,Farrer,Fisher,Florey,Flynn,Forrest,Franklin,Fraser,Fyshwick,Garran,Gilmore,Giralang,Gordon,Gowrie,Greenway,Griffith,Gungahlin,Hackett,Hall,Harrison,Hawker,Higgins,Holder,Holt,Hughes,Hume,Isaacs,Isabella Plains,Kaleen,Kambah,Kingston,Latham,Lawson,Lyneham,Lyons,Macarthur,Macgregor,Macquarie,Mawson,McKellar,Melba,Mitchell,Monash,Narrabundah,Ngunnawal,Nicholls,Oaks Estate,O'Connor,O'Malley,Oxley,Page,Palmerston,Parkes,Pearce,Phillip,Pialligo,Red Hill,Reid,Richardson,Rivett,Russell,Scullin,Spence,Stirling,Symonston,Tharwa,Theodore,Torrens,Turner,Wanniassa,Waramanga,Watson,Weetangera,Weston,Yarralumla"); |
$suburbs = explode(",", "Acton,Ainslie,Amaroo,Aranda,Banks,Barton,Belconnen,Bonner,Bonython,Braddon,Bruce,Calwell,Campbell,Chapman,Charnwood,Chifley,Chisholm,City,Conder,Cook,Curtin,Deakin,Dickson,Downer,Duffy,Dunlop,Evatt,Fadden,Farrer,Fisher,Florey,Flynn,Forrest,Franklin,Fraser,Fyshwick,Garran,Gilmore,Giralang,Gordon,Gowrie,Greenway,Griffith,Gungahlin,Hackett,Hall,Harrison,Hawker,Higgins,Holder,Holt,Hughes,Hume,Isaacs,Isabella Plains,Kaleen,Kambah,Kingston,Latham,Lawson,Lyneham,Lyons,Macarthur,Macgregor,Macquarie,Mawson,McKellar,Melba,Mitchell,Monash,Narrabundah,Ngunnawal,Nicholls,Oaks Estate,O'Connor,O'Malley,Oxley,Page,Palmerston,Parkes,Pearce,Phillip,Pialligo,Red Hill,Reid,Richardson,Rivett,Russell,Scullin,Spence,Stirling,Symonston,Tharwa,Theodore,Torrens,Turner,Wanniassa,Waramanga,Watson,Weetangera,Weston,Yarralumla"); |
| function staticmap($mapPoints, $zoom = 0, $markerImage = "iconb", $collapsible = true) |
function staticmap($mapPoints, $zoom = 0, $markerImage = "iconb", $collapsible = true) |
| { |
{ |
| $width = 300; |
$width = 300; |
| $height = 300; |
$height = 300; |
| $metersperpixel[9] = 305.492 * $width; |
$metersperpixel[9] = 305.492 * $width; |
| $metersperpixel[10] = 152.746 * $width; |
$metersperpixel[10] = 152.746 * $width; |
| $metersperpixel[11] = 76.373 * $width; |
$metersperpixel[11] = 76.373 * $width; |
| $metersperpixel[12] = 38.187 * $width; |
$metersperpixel[12] = 38.187 * $width; |
| $metersperpixel[13] = 19.093 * $width; |
$metersperpixel[13] = 19.093 * $width; |
| $metersperpixel[14] = 9.547 * $width; |
$metersperpixel[14] = 9.547 * $width; |
| $metersperpixel[15] = 4.773 * $width; |
$metersperpixel[15] = 4.773 * $width; |
| $metersperpixel[16] = 2.387 * $width; |
$metersperpixel[16] = 2.387 * $width; |
| // $metersperpixel[17]=1.193*$width; |
// $metersperpixel[17]=1.193*$width; |
| $center = ""; |
$center = ""; |
| $markers = ""; |
$markers = ""; |
| $minlat = 999; |
$minlat = 999; |
| $minlon = 999; |
$minlon = 999; |
| $maxlat = 0; |
$maxlat = 0; |
| $maxlon = 0; |
$maxlon = 0; |
| if (sizeof($mapPoints) < 1) return "map error"; |
if (sizeof($mapPoints) < 1) return "map error"; |
| if (sizeof($mapPoints) === 1) { |
if (sizeof($mapPoints) === 1) { |
| if ($zoom == 0) $zoom = 14; |
if ($zoom == 0) $zoom = 14; |
| $markers.= "{$mapPoints[0][0]},{$mapPoints[0][1]},$markerimage"; |
$markers.= "{$mapPoints[0][0]},{$mapPoints[0][1]},$markerimage"; |
| $center = "{$mapPoints[0][0]},{$mapPoints[0][1]}"; |
$center = "{$mapPoints[0][0]},{$mapPoints[0][1]}"; |
| } |
} |
| else { |
else { |
| foreach ($mapPoints as $index => $mapPoint) { |
foreach ($mapPoints as $index => $mapPoint) { |
| $markers.= $mapPoint[0] . "," . $mapPoint[1] . "," . $markerImage . ($index + 1); |
$markers.= $mapPoint[0] . "," . $mapPoint[1] . "," . $markerImage . ($index + 1); |
| if ($index + 1 != sizeof($mapPoints)) $markers.= "|"; |
if ($index + 1 != sizeof($mapPoints)) $markers.= "|"; |
| if ($mapPoint[0] < $minlat) $minlat = $mapPoint[0]; |
if ($mapPoint[0] < $minlat) $minlat = $mapPoint[0]; |
| if ($mapPoint[0] > $maxlat) $maxlat = $mapPoint[0]; |
if ($mapPoint[0] > $maxlat) $maxlat = $mapPoint[0]; |
| if ($mapPoint[1] < $minlon) $minlon = $mapPoint[1]; |
if ($mapPoint[1] < $minlon) $minlon = $mapPoint[1]; |
| if ($mapPoint[1] > $maxlon) $maxlon = $mapPoint[1]; |
if ($mapPoint[1] > $maxlon) $maxlon = $mapPoint[1]; |
| $totalLat+= $mapPoint[0]; |
$totalLat+= $mapPoint[0]; |
| $totalLon+= $mapPoint[1]; |
$totalLon+= $mapPoint[1]; |
| } |
} |
| if ($zoom == 0) { |
if ($zoom == 0) { |
| $mapwidthinmeters = distance($minlat, $minlon, $minlat, $maxlon); |
$mapwidthinmeters = distance($minlat, $minlon, $minlat, $maxlon); |
| foreach (array_reverse($metersperpixel, true) as $zoomLevel => $maxdistance) { |
foreach (array_reverse($metersperpixel, true) as $zoomLevel => $maxdistance) { |
| if ($zoom == 0 && $mapwidthinmeters < ($maxdistance + 50)) $zoom = $zoomLevel; |
if ($zoom == 0 && $mapwidthinmeters < ($maxdistance + 50)) $zoom = $zoomLevel; |
| } |
} |
| } |
} |
| $center = $totalLat / sizeof($mapPoints) . "," . $totalLon / sizeof($mapPoints); |
$center = $totalLat / sizeof($mapPoints) . "," . $totalLon / sizeof($mapPoints); |
| } |
} |
| $output = ""; |
$output = ""; |
| if ($collapsible) $output.= '<div data-role="collapsible" data-collapsed="true"><h3>Open Map...</h3>'; |
if ($collapsible) $output.= '<div data-role="collapsible" data-collapsed="true"><h3>Open Map...</h3>'; |
| $output.= '<center><img src="' . curPageURL() . 'lib/staticmaplite/staticmap.php?center=' . $center . '&zoom=' . $zoom . '&size=' . $width . 'x' . $height . '&maptype=mapnik&markers=' . |
$output.= '<center><img src="' . curPageURL() . 'lib/staticmaplite/staticmap.php?center=' . $center . '&zoom=' . $zoom . '&size=' . $width . 'x' . $height . '&markers=' . |
| $markers . '" width=' . $width . ' height=' . $height . '></center>'; |
$markers . '" width=' . $width . ' height=' . $height . '></center>'; |
| if ($collapsible) $output.= '</div>'; |
if ($collapsible) $output.= '</div>'; |
| return $output; |
return $output; |
| } |
} |
| function distance($lat1, $lng1, $lat2, $lng2, $roundLargeValues = false) |
function distance($lat1, $lng1, $lat2, $lng2, $roundLargeValues = false) |
| { |
{ |
| $pi80 = M_PI / 180; |
$pi80 = M_PI / 180; |
| $lat1*= $pi80; |
$lat1*= $pi80; |
| $lng1*= $pi80; |
$lng1*= $pi80; |
| $lat2*= $pi80; |
$lat2*= $pi80; |
| $lng2*= $pi80; |
$lng2*= $pi80; |
| $r = 6372.797; // mean radius of Earth in km |
$r = 6372.797; // mean radius of Earth in km |
| $dlat = $lat2 - $lat1; |
$dlat = $lat2 - $lat1; |
| $dlng = $lng2 - $lng1; |
$dlng = $lng2 - $lng1; |
| $a = sin($dlat / 2) * sin($dlat / 2) + cos($lat1) * cos($lat2) * sin($dlng / 2) * sin($dlng / 2); |
$a = sin($dlat / 2) * sin($dlat / 2) + cos($lat1) * cos($lat2) * sin($dlng / 2) * sin($dlng / 2); |
| $c = 2 * atan2(sqrt($a) , sqrt(1 - $a)); |
$c = 2 * atan2(sqrt($a) , sqrt(1 - $a)); |
| $km = $r * $c; |
$km = $r * $c; |
| if ($roundLargeValues) { |
if ($roundLargeValues) { |
| if ($km < 1) return floor($km * 1000); |
if ($km < 1) return floor($km * 1000); |
| else return round($km,2)."k"; |
else return round($km,2)."k"; |
| } else return floor($km * 1000); |
} else return floor($km * 1000); |
| } |
} |
| function decodePolylineToArray($encoded) |
function decodePolylineToArray($encoded) |
| { |
{ |
| // source: http://latlongeeks.com/forum/viewtopic.php?f=4&t=5 |
// source: http://latlongeeks.com/forum/viewtopic.php?f=4&t=5 |
| $length = strlen($encoded); |
$length = strlen($encoded); |
| $index = 0; |
$index = 0; |
| $points = array(); |
$points = array(); |
| $lat = 0; |
$lat = 0; |
| $lng = 0; |
$lng = 0; |
| while ($index < $length) { |
while ($index < $length) { |
| // Temporary variable to hold each ASCII byte. |
// Temporary variable to hold each ASCII byte. |
| $b = 0; |
$b = 0; |
| // The encoded polyline consists of a latitude value followed by a |
// The encoded polyline consists of a latitude value followed by a |
| // longitude value. They should always come in pairs. Read the |
// longitude value. They should always come in pairs. Read the |
| // latitude value first. |
// latitude value first. |
| $shift = 0; |
$shift = 0; |
| $result = 0; |
$result = 0; |
| do { |
do { |
| // The `ord(substr($encoded, $index++))` statement returns the ASCII |
// The `ord(substr($encoded, $index++))` statement returns the ASCII |
| // code for the character at $index. Subtract 63 to get the original |
// code for the character at $index. Subtract 63 to get the original |
| // value. (63 was added to ensure proper ASCII characters are displayed |
// value. (63 was added to ensure proper ASCII characters are displayed |
| // in the encoded polyline string, which is `human` readable) |
// in the encoded polyline string, which is `human` readable) |
| $b = ord(substr($encoded, $index++)) - 63; |
$b = ord(substr($encoded, $index++)) - 63; |
| // AND the bits of the byte with 0x1f to get the original 5-bit `chunk. |
// AND the bits of the byte with 0x1f to get the original 5-bit `chunk. |
| // Then left shift the bits by the required amount, which increases |
// Then left shift the bits by the required amount, which increases |
| // by 5 bits each time. |
// by 5 bits each time. |
| // OR the value into $results, which sums up the individual 5-bit chunks |
// OR the value into $results, which sums up the individual 5-bit chunks |
| // into the original value. Since the 5-bit chunks were reversed in |
// into the original value. Since the 5-bit chunks were reversed in |
| // order during encoding, reading them in this way ensures proper |
// order during encoding, reading them in this way ensures proper |
| // summation. |
// summation. |
| $result|= ($b & 0x1f) << $shift; |
$result|= ($b & 0x1f) << $shift; |
| $shift+= 5; |
$shift+= 5; |
| } |
} |
| // Continue while the read byte is >= 0x20 since the last `chunk` |
// Continue while the read byte is >= 0x20 since the last `chunk` |
| // was not OR'd with 0x20 during the conversion process. (Signals the end) |
// was not OR'd with 0x20 during the conversion process. (Signals the end) |
| while ($b >= 0x20); |
while ($b >= 0x20); |
| // Check if negative, and convert. (All negative values have the last bit |
// Check if negative, and convert. (All negative values have the last bit |
| // set) |
// set) |
| $dlat = (($result & 1) ? ~($result >> 1) : ($result >> 1)); |
$dlat = (($result & 1) ? ~($result >> 1) : ($result >> 1)); |
| // Compute actual latitude since value is offset from previous value. |
// Compute actual latitude since value is offset from previous value. |
| $lat+= $dlat; |
$lat+= $dlat; |
| // The next values will correspond to the longitude for this point. |
// The next values will correspond to the longitude for this point. |
| $shift = 0; |
$shift = 0; |
| $result = 0; |
$result = 0; |
| do { |
do { |
| $b = ord(substr($encoded, $index++)) - 63; |
$b = ord(substr($encoded, $index++)) - 63; |
| $result|= ($b & 0x1f) << $shift; |
$result|= ($b & 0x1f) << $shift; |
| $shift+= 5; |
$shift+= 5; |
| } while ($b >= 0x20); |
} while ($b >= 0x20); |
| $dlng = (($result & 1) ? ~($result >> 1) : ($result >> 1)); |
$dlng = (($result & 1) ? ~($result >> 1) : ($result >> 1)); |
| $lng+= $dlng; |
$lng+= $dlng; |
| // The actual latitude and longitude values were multiplied by |
// The actual latitude and longitude values were multiplied by |
| // 1e5 before encoding so that they could be converted to a 32-bit |
// 1e5 before encoding so that they could be converted to a 32-bit |
| // integer representation. (With a decimal accuracy of 5 places) |
// integer representation. (With a decimal accuracy of 5 places) |
| // Convert back to original values. |
// Convert back to original values. |
| $points[] = array( |
$points[] = array( |
| $lat * 1e-5, |
$lat * 1e-5, |
| $lng * 1e-5 |
$lng * 1e-5 |
| ); |
); |
| } |
} |
| return $points; |
return $points; |
| } |
} |
| function geocode($query, $giveOptions) |
function geocode($query, $giveOptions) |
| { |
{ |
| global $cloudmadeAPIkey; |
global $cloudmadeAPIkey; |
| $url = "http://geocoding.cloudmade.com/$cloudmadeAPIkey/geocoding/v2/find.js?query=" . urlencode($query) . "&bbox=-35.5,149.00,-35.15,149.1930&return_location=true&bbox_only=true"; |
$url = "http://geocoding.cloudmade.com/$cloudmadeAPIkey/geocoding/v2/find.js?query=" . urlencode($query) . "&bbox=-35.5,149.00,-35.15,149.1930&return_location=true&bbox_only=true"; |
| $contents = json_decode(getPage($url)); |
$contents = json_decode(getPage($url)); |
| if ($giveOptions) return $contents->features; |
if ($giveOptions) return $contents->features; |
| elseif (isset($contents->features[0]->centroid)) return $contents->features[0]->centroid->coordinates[0] . "," . $contents->features[0]->centroid->coordinates[1]; |
elseif (isset($contents->features[0]->centroid)) return $contents->features[0]->centroid->coordinates[0] . "," . $contents->features[0]->centroid->coordinates[1]; |
| else return ""; |
else return ""; |
| } |
} |
| function reverseGeocode($lat, $lng) |
function reverseGeocode($lat, $lng) |
| { |
{ |
| global $cloudmadeAPIkey; |
global $cloudmadeAPIkey; |
| $url = "http://geocoding.cloudmade.com/$cloudmadeAPIkey/geocoding/v2/find.js?around=" . $lat . "," . $lng . "&distance=closest&object_type=road"; |
$url = "http://geocoding.cloudmade.com/$cloudmadeAPIkey/geocoding/v2/find.js?around=" . $lat . "," . $lng . "&distance=closest&object_type=road"; |
| $contents = json_decode(getPage($url)); |
$contents = json_decode(getPage($url)); |
| return $contents->features[0]->properties->name; |
return $contents->features[0]->properties->name; |
| } |
} |
| ?> |
?> |
| |
|