+ '; +if ($opendiv) echo '

'.$pageTitle.'

'; } @@ -43,8 +121,12 @@ echo '

'; } +$service_periods = Array ('sunday','saturday','weekday'); + function service_period() { +if (isset($_SESSION['service_period'])) return $_SESSION['service_period']; + switch (date('w')){ case 0: @@ -56,24 +138,39 @@ } } +function remove_spaces($string) +{ + return str_replace(' ','',$string); +} + function midnight_seconds() { // from http://www.perturb.org/display/Perlfunc__Seconds_Since_Midnight.html - $secs = (date("G") * 3600) + (date("i") * 60) + date("s"); - return $secs; +if (isset($_SESSION['time'])) { + $time = mkdate($_SESSION['time']); + return (date("G",$time) * 3600) + (date("i",$time) * 60) + date("s",$time); + } + return (date("G") * 3600) + (date("i") * 60) + date("s"); } function midnight_seconds_to_time($seconds) { +if ($seconds > 0) { $midnight = mktime (0, 0, 0, date("n"), date("j"), date("Y")); return date("h:ia",$midnight+$seconds); +} else { +return ""; +} } function getPage($url) { + debug($url); $ch = curl_init($url); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, 1 ); curl_setopt( $ch, CURLOPT_HEADER, 0 ); + curl_setopt($ch,CURLOPT_TIMEOUT,30); $page = curl_exec($ch); + if(curl_errno($ch)) echo " Database temporarily unavailable: ".curl_errno($ch)." ".curl_error($ch).""; curl_close($ch); return $page; } @@ -85,6 +182,216 @@ } return $f; } + +function staticmap($mapPoints, $zoom = 0, $markerImage = "iconb") +{ +$width = 300; +$height = 300; +$metersperpixel[9]=305.492*$width; +$metersperpixel[10]=152.746*$width; +$metersperpixel[11]=76.373*$width; +$metersperpixel[12]=38.187*$width; +$metersperpixel[13]=19.093*$width; +$metersperpixel[14]=9.547*$width; +$metersperpixel[15]=4.773*$width; +$metersperpixel[16]=2.387*$width; +// $metersperpixel[17]=1.193*$width; +$center = ""; +$markers = ""; +$minlat = 999; +$minlon = 999; +$maxlat = 0; +$maxlon = 0; + + if (sizeof($mapPoints) < 1) return "map error"; + if (sizeof($mapPoints) === 1) { + if ($zoom == 0) $zoom = 14; + $markers .= "{$mapPoints[0][0]},{$mapPoints[0][1]},$markerimage"; + $center = "{$mapPoints[0][0]},{$mapPoints[0][1]}"; + } else { + foreach ($mapPoints as $index => $mapPoint) { + $markers .= $mapPoint[0].",".$mapPoint[1].",".$markerImage.($index+1); + if ($index+1 != sizeof($mapPoints)) $markers .= "|"; + if ($mapPoint[0] < $minlat) $minlat = $mapPoint[0]; + if ($mapPoint[0] > $maxlat) $maxlat = $mapPoint[0]; + if ($mapPoint[1] < $minlon) $minlon = $mapPoint[1]; + if ($mapPoint[1] > $maxlon) $maxlon = $mapPoint[1]; + $totalLat += $mapPoint[0]; + $totalLon += $mapPoint[1]; + } + if ($zoom == 0) { + $mapwidthinmeters = distance($minlat,$minlon,$minlat,$maxlon); + foreach (array_reverse($metersperpixel,true) as $zoomLevel => $maxdistance) + { + if ($zoom == 0 && $mapwidthinmeters < ($maxdistance + 50)) $zoom = $zoomLevel; + } + } + $center = $totalLat/sizeof($mapPoints).",".$totalLon/sizeof($mapPoints); + } + + return '

'; +} + +function distance($lat1, $lng1, $lat2, $lng2) +{ + $pi80 = M_PI / 180; + $lat1 *= $pi80; + $lng1 *= $pi80; + $lat2 *= $pi80; + $lng2 *= $pi80; + + $r = 6372.797; // mean radius of Earth in km + $dlat = $lat2 - $lat1; + $dlng = $lng2 - $lng1; + $a = sin($dlat / 2) * sin($dlat / 2) + cos($lat1) * cos($lat2) * sin($dlng / 2) * sin($dlng / 2); + $c = 2 * atan2(sqrt($a), sqrt(1 - $a)); + $km = $r * $c; + + return $km * 1000; +} + +function decodePolylineToArray($encoded) +{ +// source: http://latlongeeks.com/forum/viewtopic.php?f=4&t=5 + $length = strlen($encoded); + $index = 0; + $points = array(); + $lat = 0; + $lng = 0; + + while ($index < $length) + { + // Temporary variable to hold each ASCII byte. + $b = 0; + + // The encoded polyline consists of a latitude value followed by a + // longitude value. They should always come in pairs. Read the + // latitude value first. + $shift = 0; + $result = 0; + do + { + // The `ord(substr($encoded, $index++))` statement returns the ASCII + // code for the character at $index. Subtract 63 to get the original + // value. (63 was added to ensure proper ASCII characters are displayed + // in the encoded polyline string, which is `human` readable) + $b = ord(substr($encoded, $index++)) - 63; + + // AND the bits of the byte with 0x1f to get the original 5-bit `chunk. + // Then left shift the bits by the required amount, which increases + // by 5 bits each time. + // OR the value into $results, which sums up the individual 5-bit chunks + // into the original value. Since the 5-bit chunks were reversed in + // order during encoding, reading them in this way ensures proper + // summation. + $result |= ($b & 0x1f) << $shift; + $shift += 5; + } + // Continue while the read byte is >= 0x20 since the last `chunk` + // was not OR'd with 0x20 during the conversion process. (Signals the end) + while ($b >= 0x20); + + // Check if negative, and convert. (All negative values have the last bit + // set) + $dlat = (($result & 1) ? ~($result >> 1) : ($result >> 1)); + + // Compute actual latitude since value is offset from previous value. + $lat += $dlat; + + // The next values will correspond to the longitude for this point. + $shift = 0; + $result = 0; + do + { + $b = ord(substr($encoded, $index++)) - 63; + $result |= ($b & 0x1f) << $shift; + $shift += 5; + } + while ($b >= 0x20); + + $dlng = (($result & 1) ? ~($result >> 1) : ($result >> 1)); + $lng += $dlng; + + // The actual latitude and longitude values were multiplied by + // 1e5 before encoding so that they could be converted to a 32-bit + // integer representation. (With a decimal accuracy of 5 places) + // Convert back to original values. + $points[] = array($lat * 1e-5, $lng * 1e-5); + } + + return $points; +} + +function object2array($object) { + if (is_object($object)) { + foreach ($object as $key => $value) { + $array[$key] = $value; + } + } + else { + $array = $object; + } + return $array; +} + +function geocode($query, $giveOptions) { + $url = "http://geocoding.cloudmade.com/daa03470bb8740298d4b10e3f03d63e6/geocoding/v2/find.js?query=".$query."&bbox=-35.5,149.00,-35.15,149.1930&return_location=true&bbox_only=true"; + $contents = json_decode(getPage($url)); + if ($giveOptions) return $contents->features; + elseif (isset($contents->features[0]->centroid)) return $contents->features[0]->centroid->coordinates[0].",".$contents->features[0]->centroid->coordinates[1]; + else return ""; +} + +function reverseGeocode($lat,$lng) { + $url = "http://geocoding.cloudmade.com/daa03470bb8740298d4b10e3f03d63e6/geocoding/v2/find.js?around=".$lat.",".$lng."&distance=closest&object_type=road"; + $contents = json_decode(getPage($url)); + return $contents->features[0]->properties->name; +} + +function startsWith($haystack,$needle,$case=true) { + if($case){return (strcmp(substr($haystack, 0, strlen($needle)),$needle)===0);} + return (strcasecmp(substr($haystack, 0, strlen($needle)),$needle)===0); +} + +function endsWith($haystack,$needle,$case=true) { + if($case){return (strcmp(substr($haystack, strlen($haystack) - strlen($needle)),$needle)===0);} + return (strcasecmp(substr($haystack, strlen($haystack) - strlen($needle)),$needle)===0); +} +function bracketsMeanNewLine($input) { + return str_replace(")","",str_replace("(","
",$input)); +} + +function viaPoints($tripid,$stopid, $timingPointsOnly = false) { + global $APIurl; + $url = $APIurl."/json/tripstoptimes?trip=".$tripid; + +$json = json_decode(getPage($url)); +debug(print_r($json,true)); +$stops = $json[0]; +$times = $json[1]; +$foundStop = false; +$viaPoints = Array(); +foreach ($stops as $key => $row) +{ + if ($foundStop) { + if (!$timingPointsOnly || !startsWith($row[5],"Wj") ) { + $viaPoints[] = Array("id" => $row[0], "name" => $row[1], "time" => $times[$key]); + } + } else { + if ($row[0] == $stopid) $foundStop = true; + } +} + return $viaPoints; +} + +function viaPointNames($tripid,$stopid) { + $points = viaPoints($tripid,$stopid,true); + $pointNames = Array(); + foreach ($points as $point) { + $pointNames[] = $point['name']; + } + return implode(", ",$pointNames); +} ?>